Pre-Trip Maintenance (PTI)
Reefer containers · Beginner · Updated 2026-11-08
A reefer Pre Trip Inspection checks the container, refrigeration unit, electrical system, sensors, alarms, and airflow before loading. It helps catch problems early and protect cargo during transport.
Reefer PTI: A Complete Guide to Inspecting a Refrigerated Container A refrigerated container can look ready for work and still have a problem that puts its cargo at risk. A fan may not be running properly, a sensor may give an incorrect reading, or the container may have damage that lets cold air escape. A Pre Trip Inspection, commonly called a PTI, helps identify these issues before the container is loaded and sent on its way.
A proper PTI checks both the refrigeration equipment and the condition of the container. It also confirms that the unit can operate safely and maintain the temperature required for the shipment. What Is a Reefer PTI? A reefer PTI is an inspection and operational test carried out before a refrigerated container is released for use. It gives the operator an opportunity to find faults while the container is still empty and easy to access.
The exact inspection steps can vary by equipment model, carrier requirements, and the type of cargo. A trained technician should follow the relevant service instructions and inspection procedures for the unit. Why Is a PTI Important? Reefer cargo depends on stable conditions throughout its journey. If a refrigeration unit fails, airflow is restricted, or the temperature setting is wrong, goods can arrive damaged or unusable.
A PTI helps reduce the chance of problems by checking the equipment before loading. It can also confirm that important records, container details, and safety information are clear and usable.
For businesses handling food, medicine, flowers, or other temperature sensitive products, this inspection is an important part of protecting the shipment. What Does a Reefer PTI Check? Container identity and records The inspection begins with the container identification details. The container number should be clear and should match the relevant documents and maintenance records.
The technician may also check the safety approval plate and the refrigeration unit data plate. These plates contain information about the container and its equipment. The unit data plate can help confirm details such as the model, serial number, refrigerant, and electrical requirements.
If a plate or label is missing or unreadable, the information should be checked through the appropriate owner or service provider before the container is released. Exterior condition The exterior inspection looks for signs of damage that could affect the container’s structure or operation. The technician checks the main panels, corners, doors, handles, locking parts, and refrigeration unit for visible damage.
Doors should close correctly, and the seals should be in good condition. Gaps around a door can allow warm air or moisture to enter, making it harder to maintain the required temperature. Interior condition The cargo space should be clean, dry, and free from unwanted smells or residue. Signs of pests, moisture, loose material, or contamination should be investigated before loading.
The floor channels should be clear so air can move beneath the cargo. The walls and ceiling should be checked for visible damage, and the cargo space should be suitable for the goods being shipped.
A clean interior matters because airflow in a reefer moves through and around the cargo. Obstructions or debris can affect circulation and make temperature control less consistent. Refrigeration equipment The refrigeration unit is checked for visible damage, unusual noise, and signs of leaks or loose parts. A technician will inspect the fans and relevant components according to the unit’s service procedure.
The unit is then operated to confirm that it starts and runs as expected. The controller, display, and available indicators should be checked, along with any active alarms or fault messages.
The supply and return air paths should be clear. If air cannot circulate freely, the unit may struggle to keep the cargo at the required temperature. Temperature and sensors The controller setting should match the shipment instructions. The technician checks the displayed temperature and relevant sensors as part of the inspection.
A temperature reading on the controller is useful, but it should be considered alongside the unit’s operating condition and inspection results. If a sensor reading appears unusual or inconsistent, it should be investigated before the container is approved. Electrical supply and safety The power connection should be inspected for visible damage and secure fitting. The technician should also check that the unit responds as expected when connected to the appropriate power source.
Reefer equipment can contain high voltage parts, moving fans, hot surfaces, and pressurized refrigerant. Inspection and repair work should be carried out by trained personnel who follow the equipment maker’s safety instructions. Defrost and alarm checks A PTI may include checks of the defrost system and alarm functions. These help confirm that the unit can manage frost buildup and alert operators when a fault occurs.
The technician should record any alarms found during the inspection and confirm that they have been addressed according to the approved procedure. A container should not be treated as ready simply because it powers on. What Happens After the Inspection? Once the checks and required operating tests are complete, the technician records the findings. If the unit passes, it can be released according to the depot or carrier process.
If a fault is found, the container may need maintenance or repair before it is used. After corrective work, the relevant checks should be repeated and recorded. Keeping clear inspection records helps teams understand the container’s condition and maintenance history. A PTI Does Not Replace Careful Loading A successful PTI confirms the container’s condition at the time of inspection. It does not guarantee that cargo will remain in good condition if it is loaded incorrectly or handled poorly.
Before loading, check that the cargo is prepared for the required transport temperature and that the container setting matches the shipment instructions. Arrange goods to allow proper airflow, and avoid blocking the supply or return air paths. Follow the carrier’s and equipment maker’s procedures for operating the unit and opening the doors. Common Questions About Reefer PTI When should a PTI be carried out? A PTI is normally completed before an empty reefer container is released for loading. The inspection should be recent enough to give the operator confidence in the unit’s condition at dispatch. Can a container pass a PTI if it has an active alarm? An active alarm should be investigated. Whether the unit can be released depends on the alarm, the equipment instructions, and the applicable inspection procedure. A qualified technician should make that decision and record the outcome. Is a PTI the same as a container cleanliness check? No. A PTI checks the refrigeration equipment and container condition, while a cleanliness check focuses on whether the cargo space is suitable for the shipment. Both matter before loading.
Who should perform a reefer PTI? A trained technician familiar with the refrigeration unit and its inspection procedures should carry out the technical checks. Operators can also make a visual check of the container and report anything that appears wrong. Final Thoughts A thorough reefer PTI helps catch equipment faults, damage, and airflow problems before cargo is loaded. Checking the identification details, container structure, interior condition, refrigeration unit, sensors, alarms, and power supply gives operators a clearer picture of whether the container is ready for service.
Good inspection records and careful loading practices complete the process. Together, they help protect cargo and support a more reliable refrigerated transport journey.